Replacing Anchor Chain, Anchor Windlass, and Chain Locker Modifications


Replacing Anchor Chain, Anchor Chain Windlass, and Chain Locker Modifications we made to Sailboat Brick House.

Replacing anchor chain
New An hair Chain, old Windlass, on a New deck!

We finally found ourselves replacing anchor chain on Brick House. It was a long time coming…the anchor chain is 26+ years old and was getting rusty… so it was a much needed upgrade! It turns out there are quite a few factors to consider when replacing anchor chain on a sailboat! It also turns out that buying anchor chain isn’t the only thing to consider when replacing anchor chain…the Windlass, and the base it sits on is important, right down to the details of the chain locker that the chain will live in! Replacing Anchor Chain is something every cruiser needs to think about and research. When replacing anchor chain, do your homework,a

We are still hard at work in the boatyard in Richards Bay, South Africa. As we sailed across the Indian Ocean this year, we chose Maggi Chains USA to replace our new galvanized anchor chain. This high quality calibrated anchor chain is made by Maggi Chain in Italy. We arranged to have it shipped  to Richards Bay, South Africa via a slow ship. As we made our way across the Indian Ocean, the new anchor chain, slowly made its way to us.

Advertisements

We had decided in SE Asia that we specifically wanted Maggi  Anchor Chain, made in Italy and not some of the chain we were seeing imported locally. We mostly saw Chinese Anchor Chain. It’s not to say all Chinese Chain is inferior. It’s that some is good, some is bad, and it’s hard to figure out if your particular strand is a good one or a bad one, and if it was tested by a reputable company or not, and  if the certificate is authentic or not. So we put our trust in a reputable manufacturer, in the USA; an honest, reputable retailer with great service, and ordered our Maggi anchor chain well in advance of landfall. We ordered galvanized, calibrated 3/8 inch Maggi Aqua4, Grade 40 (G40) anchor Chain from the sister company of http://www.anchorsandchains.com/. 

Advertisements

Twelve or thirteen years ago, we also had purchased an anchor Windlass, made in Italy. It’s a Lofrans Tigres electric windlass, which has performed flawlessly for its entire life. In this video, Patrick takes it off (the anchor Windlass) , does some windlass maintenance and reinstalls the Windlass.

Before he shows how to install the Windlass, he shows many things he did to the chain locker to make sure the Windlass keeps running flawlessly, and to maintain the anchor chain. The anchor locker smells and looks fresher and is ready to receive brand new anchor chain.

 

In the second video, besides a tour of some of the more boring parts of Brick House, Patricks shows the chain locker modifications he did years ago to better accommodate our anchor chain.

The third video is an above deck tour of Sailboat Brick House, which shows a bit more about the Windlass….

Enjoy!

 

 

Valiant 40 Sailboat Tour (#3) Down Below Part 2. Water Tank Repair, Chain Locker, Marine Toilet, Electronics

 

(Disclosure: Maggi Chains provided us a discount, but we chose this anchor chain because we felt it the very best choice to hold our cruising sailboat in everything that will challenge it for the next several decades, anchoring very often in challenging conditions due to the cruising ground that we choose. We certainly could have found much cheaper anchor chain, and purchased it locally to avoid shipping costs. But Maggi Chains was our absolute number one choice when it was time to replace our anchor chain. It was a very researched and educated decision but only time will tell just How good of a decision it was. It will likely appear occasionally in our “What Worked, What Didn’t” articles we write every year, detailing the longevity of or the shortcomings of the marine products we choose to put on Brick House, so watch there for updates, and subscribe to this blog for updates too.)

Here is the  previous video, detailing why we ripped Out the deck below the Windlass. Just how string die sthe deck indeed the Windlass need to be?

Rotten to the CORE! Replace rotten sailboat decking, BEFORE the Lofrans Windlass rips right out!

How we communicate at Sea…

Bluewater Sailboat Brick House Communications at Sea: Predictwind Offshore & Iridium GO or Sailmail and Winlink on the SSB

 

 

What Worked, What Didn’t, Year 10

This is what appears in the October issue of Blue Water Sailing Magazine. We had no idea when we left Rhode Island that we would still be cruising after 10 years. Now, there really is no reason to quit so we are preparing for sailing off to the Indian Ocean in January, 2018. It looks like there will be many more What Worked, What Didn’ts, in the future. 

 

After ten years of cruising, we aren’t going home any time soon. We are on our way across the Indian Ocean to South Africa; then; Tierra Del Fuego has an enticing tone. Along the way we are still finding some things that work and some that don’t.

LOFRANS TIGRES Windlass
After 10 years of countless anchorages on our way to half way around the world, our Lofrans Tigres windlass has been beat by tropical sun and continuous dousing of salt water. The only freshwater rinse it would get is from the rain. The Tigres has lost some of its original cosmetic sparkle but none of its strength; this is despite at times winching up abandoned moorings or some other incredibly heavy thing off the ocean bottom along with our own ground tackle. And of course, there have been the impossible chain snags on rocks which pulled our bow down to the water and required SCUBA gear to untangle. With all the episodes of over-stressing, the only injury to the windlass was a widening of the “inner cone clutch” keyway. If the inner cone clutch can be removed without damaging it, then a machine shop can cut a new keyway opposite the worn one. This will suffice till a new cone clutch can be ordered.
The only maintenance I have done to the windlass is to occasionally apply a light coat of grease to the inner and outer clutch cones. As suggested by Imtra, lithium grease should be used for this lubrication although I have been using water repellent winch grease. Do not use automotive grease as it will attract salt residue and turn gummy.
There is a series of Tigres service videos at https://www.youtube.com/watch?v=daJBBSqcgNI
The only strange thing about the Lofrans is that you are supposed to change the gear oil every 4 years. To do so, however, you have to remove the whole windlass then turn it upside down to drain it. So, even changing the oil once in 9.5 years, as in my case, the Lofrans continues to work fine. When changing the oil, use a new gasket or “O”-ring under the oil screw plug to keep a good seal against water intrusion. When operating a windlass, be sure to run the electrical charging system to make sure the windlass is getting full amperage.

 

Manson Supreme Anchor


When we sailed away on Brick House for a world voyage, we kept the anchor chain on the CQR 60 pound anchor. On a very windy day in the Bahamas, anchored in 10 feet of water with 100 feet of chain out, the CQR plowed a long farmer’s furrow as it endlessly dragged across a grass bed nearly ending our voyage shortly after it began. Immediately we swapped the chain to our 65 pound Bruce. The Bruce was a big technological advancement over the CQR. Over a ten year period, the Bruce performed adequately except in 3 difficult situations, once in soft mud and twice in smooth coral. I always felt an anchor with a more pointy business end would not have slipped its hold in the way the Bruce did and would have given a more secure hold in more common anchoring textures.
Over the years, anchor technology has jumped over our Bruce anchor and we have followed the evolution. I have seen the adverts and touched the new anchor designs displayed on chandlery floors. There are several very good new anchor brands to choose from. Researching anchor tests and reading what Practical Sailor has to say about the Manson Supreme, we decided to make that our primary anchor and move the Bruce to the number two position. We anchor in far more varied conditions than what most anchors are tested in. I feel the Manson Supreme will be a big upgrade to our well used Bruce and should perform far better. However, if an anchor was made in China, I would not touch it. Manson anchors are made in New Zealand where we have witnessed the high caliber of yacht related manufacturing.
The one thing on the Manson Supreme I will not be using is the long slot to pull the anchor out of the sea bottom backwards. That is for day anchoring, not for a cruising boat that swings with changing currents or shifting winds.

Mack Sails


In Thailand, half way around the world from our sail maker in Stuart, Florida, we have ordered a new genoa to be made by Mack Sails. Some sailors in the U.S. think in the opposite direction as though it is a good idea to send their money to South East Asia to order a new sail.

In Thailand, we have had experiences with two sail lofts. One was a U.S. branded loft, in Jomtien Beach, Thailand, where we had them replace the light colored sun covering on our 6 year old Mack Sails. This was simple seamstress work. They did a nice job but the total bill was astoundingly exorbitant as though we were in a posh yachting haven of the Mediterranean. This is shocking when one considers the average Thai worker will make, more/less, $15 a day, if they are fortunate enough to find a job. It appears sail repair and sail making has taken on a world pricing regardless of the local economy. We won’t be using that sail loft again.

Since we are preparing to cross the Indian Ocean and potentially wander into the harsh, adventurous latitudes of deep South America, our attention turned to our mainsail. That sturdy sail was made in Whangarei, New Zealand, by David Parr, at Calibre Sails. The 8 year old sail had normal wear and an abused area which prudently needed attention. We took that sail to a very large, well known loft in Phuket, Thailand. When it was repaired and handed back to us, it was disappointing to find new webbing securing the sail slides was minimally stitched, unlike when we handed them the sail to repair. That attachment would not last a storm let alone an ocean crossing. There were other details which left an incomplete job. The loft was more than happy to correct these items but I had to think, what if we were not personally there to spot the defects before rolling it out on the deck of our floating home? What if this was done to a new sail and sent to us in the U.S.? It became apparent that if the workers on the floor, who’s hands put the sails together, have little experience sailing a boat, they will not understand the tremendous forces placed on a sail and will have a misguided sense of durability and construction technique. It does not matter if the upper management is European, there are too many details that cannot be micromanaged and will slip though the cracks. We were finding that to have sails made or repaired in Thailand may not be of the quality and pricing that advertisements suggest.

Googling for feedback on this Thai loft, seasonal coastal cruisers in the U.S. had favorable responses. When I queried our long range cruising friends, the consensus was very negative and that this brand of sail was not suitable for long term, offshore use. And with that, we chose not to follow a false economy but to order a US made Mack Sail which has proven endurance on Brick House. Our 6 year old sails, with some maintenance on the sun covers, are like brand new despite years of sitting in the sun, and being used in every kind of weather condition.

Mack uses only the best, most expensive Dacron, Marblehead cloth made by Bob Bainbridge. “These fabrics are the finest, most tightly woven fabrics in the world and rely on the quality of yarn and weave, rather than impregnated resins, to maintain integrity.” To distribute loading more evenly across the fabric on our genoa, and to hold the sail shape for 15 to 20 years, Mack sews their jibs with the more difficult miter panels rather than the easier to sew, long, crosscut panels. The sail maker in Phuket insisted that Marblehead cloth is so strong that miter panels are not necessary but as an option, for 20% more cost, we could have a new sail made with miter panels. We are not interested in “Good”, “Better”, “Best” options, we only want the best choice and what will last the longest which equals being the most cost effective as we roam the world. At Mack Sails, all the miter panels are joined using triple zigzag stitches. There are many details that go into a strong Mack sail, like the finished seams along the leech and foot of a sail called tabling. On our Mack Sails, the tablings are two-plied with an extra thickness of wider Dacron tape under the tabling. Leech lines are always centered in the tabling with stitching on either side to prevent the very aft edge of the sail from “cracking.” Additionally, we found darker Sunbrella will last substantially longer than lighter shades so the new sun cover on the genoa will be a dark green color.

All of our Mack Sails, older and new, will certainly be with us in Tierra Del Fuego and far beyond.

Reef Cringle Hook

In decades of sailing, I have never seen a reef hook which would properly retain the reef tack cringle while setting in a reef in the main sail. Too often, I would set the tack cringle in the reef hook and go to hoist the sail only to have the cringle fall off requiring one hand to hold the cringle in place while hoisting the sail with the other hand and somehow keeping myself from being tossed away from the mast. For an improved reef hook, I removed the barb from an old spear gun head then ground a flat spot on the reef hook so the barb would fit nicely without binding. A stainless rivet holds the barb in place. Why hasn’t someone made this commercially, long ago?

MARCH PUMP

For nearly 10 years, an 893 series, brushless, March pump, was a water assist to the cooling system of our galley freezer. Another March pump sat idle in case we wanted to lift water to our reverse osmosis water maker. The March pump is a magnetic drive pump which eliminates the need for a shaft seal and makes them reliable. Besides longevity, another advantage is that a centrifugal pump is far quieter than a diaphragm pump, and uses less electricity. March pumps are incredibly expensive so it was disappointing to have the ceramic magnet on the shaft, a vital part to make the pump work, of both of our March pumps fall apart. It is easy to replace the expensive shafts with attached impeller and magnet but I think I will look for a less expensive option.

Wheel-a-Weigh

I don’t remember how many bent struts we have replaced on our Wheel-a-Weigh retractable dinghy wheels. Coasting onto a beach with a small surf running is enough to slam the wheels against the beach bottom and bend the struts. Also backing off a beach and slamming into a small obstruction will cause the same damage. Being anodized rectangular tube aluminum, they can’t be straightened again as that would make the metal even weaker. Since there is no corresponding size of rectangular tubular stainless steel, we had solid 304 stainless steel struts made. They are considerably heavier than the original aluminum but should end the bent strut problem.

Green Laser Marker

In many parts of the world, COLREGS, International Regulations for Preventing Collisions at Sea, have no meaning. In South East Asia, fishermen have a strange belief that if they pass close by the bow of another moving boat, they can wipe away their bad fishing luck onto the victim vessel. To make navigation even more difficult, at night, local craft throughout S.E. Asia and in other parts of the world burn no recognized navigation lights. And it seems the captains of these boats do not understand the proper navigation lights of a long range cruising sailboat. To help discourage the dangerous practice of crossing close in front of our bow or to grab the attention of a boat which is on a non-yielding collision course with us, we found the best remedy is to shine our extremely high powered, 1,000 milliwatt, green laser marker in the sky above the approaching boat. This laser is far more powerful and has noting in common with the “laser flares” being marketed for distress signaling. During the day we do not see the beam of our laser but this does not diminish the effectiveness on the receiving end. Four out of four times, the fishing boats intent on crossing close across our bow decided it would be better luck to pass behind us. At night, the beam is an incredibly bright ray that can be seen for many miles. When shining into the sky over a boat closing dangerously near, it is a great relief to hear the engines of that vessel suddenly go to idle. From a street vendor in Indonesia, we paid $40 for the Laser JD-303 but it can cost up to several hundred dollars online. Our laser uses one large 3.7volt rechargeable battery. There are some incredible lasers of 5,000 milliwatts of power that produce an excess abundance of attention grabbing light and, if one cared to start a fire, can quickly get a dark object smoking at very close range.

Navionics Charts and Application

We have used both Navionics chart chips, and the Navionics application on our smartphone since we left Rhode Island. Both keep getting better every year. The ‘Boating’ application, which years ago was very basic, now has great functionality. With “Plotter Sync”, part of the Navionics app installed on the smartphone, routes and markers, can by synced to our Raymarine Es128 Chartplotter. We can update the chart chip in the chartplotter, and can upload our own ‘sonar ( depth) charts’ that the chartplotter creates as we sail. Now that this is such a simple process, more and more sailors are uploading data to the system, resulting in a plethora of useful soundings, anchorages information and other such “community edits” for everyone with Navionics to use. We used to have to remove the tiny chart chip from the plotter to do any of this but now its done via a simple wifi connection between the 2 devices. Navionics has added accurate tide and weather information for all areas, as well. Between the regular updated Navionics charts and the ‘Sonarcharts’ created by other sailors’ uploads through Plotter Sync, we have an extremely thorough visualization of the depths, routes and anchorages everywhere we go, without the need to really consult any other source! Very handy!

Even though we are on the antipode we will not be getting closer to home when we sail to the Indian ocean. Homeward bound will be a long time coming. Till then, we will keep tweaking and updating our floating home to keep it safe.